Monuments and markers shall be placed so that the center of the pipe or marked point shall coincide exactly with the intersection of lines to be marked, and shall be set so that the top of the monument or marker is nearly level with the surface of the surrounding ground after grading.

    A.    Monuments shall be set at points where the outside boundary lines of the subdivision intersects with existing and proposed street right-of-way lines.

    B.    Markers shall be set:

    1.    At the beginning and ending of all curves along street property lines;

    2.    At all points where lot lines intersect curves, either front or rear;

    3.    At all angles in property lines or lots;

    4.    At all other lot corners not established by a monument;

    5.    At all required points in minor plats.

    C.    Type. Monuments shall consist of iron pipes or steel bars at least thirty-six inches long, and five-eighths inch in diameter. Markers shall consist of iron pipes or steel bars at least thirty inches long, and five-eighths inch in diameter. (Ord. 97-48 § 3 (part), 1997: prior code § 28-57)